Home / Collections / Drone Development Kits / Flight Core - PX4 Drone Flight Controller (Board-only)

Flight Core - PX4 Drone Flight Controller (Board-only)


Flight Core - PX4 Drone Flight Controller (Board-only)


PX4 Flight Controller Made in USA!

The ModalAI Flight Core runs the PX4 flight controller, and is made in the USA. The Flight Core can be paired with VOXL for obstacle avoidance and indoor or outdoor GPS-denied navigation. Flight Core can also be used independently as a standalone flight controller.

The VOXL paired with Flight Core is 100% software compatible with our upcoming, single-board VOXL-Flight.

Performance and Security for Enterprise and Defense

Flight Core is based high-performance Arm® Cortex®-M7 32-bit RISC core operating at up to 216 MHz frequency. Flight Core includes an NXP® Secure Element A71CH for enhanced security.

Flight Core features the TDK/Invensense ICM-42688 which offers the lowest noise-floor in the industry for enhanced flight performance.


  • Flight Core PX4 Board (Pictured)

NOT Included

(but included in the Full Kit product variant)

  • 5V Power Module with battery voltage and current monitoring
  • USB cable (JST-style)
  • RC input cable
  • PWM output cable and Break Out Board
  • Serial cable for VOXL Companion computer connection



Feature Details
MCU 216MHz, 32-bit ARM M7 STM32F765II
Memory 256Kb FRAM
  2Mbit Flash
  512Kbit SRAM
Firmware PX4
IMUs ICM-20602 (SPI1)
  ICM-42688 (SPI2) - Coming Soon
  BMI088 (SPI6)
Barometer BMP388 (I2C4)
Secure Element A71CH (I2C4)
microSD Card Information on supported cards
Inputs GPS/Mag
  CAN bus
Outputs 6 LEDs (2xRGB)
  8 PWM Channels
Extra Interfaces 3 serial ports


Pixhawk is a trademark of Lorenz Meier